G.657.A2 optical fiber.

Batch-tested. Approved by you before shipment.

Illustrative optical fiber production line in a clean, naturally lit manufacturing hall

Cable manufacturing

Coated bare fiber for cable production. Confirm the coating, geometry, reel length, and optical limits against your line requirements.

Respooling & integration

Factory spools for processing and integration into your own products. Agree winding and handling requirements before ordering.

Source qualification

Start with a stock trial, compare available brands using the same tests, and qualify the fiber in your own process.

A clear path to your first order.

01Requirements

Share your requirement.

Tell us the volume, coating diameter, preferred source, delivery destination, and required date. Include any additional tests or acceptance criteria so we can confirm suitable sourcing and delivery options.

02Trial

Qualify the fiber.

If you’d like to test before placing a larger order, request a stock trial from 10 spools. We can arrange testing with your specialist at the Poland warehouse, in person or by video, before you evaluate the fiber in your own process.

03Confirm order

Confirm price and allocation.

Agree the quotation, volume, delivery terms, and shipment schedule. For large orders, a 30% advance on the full order secures the price and production slot, with payment allocation confirmed in the order terms.

04Inspect & approve

Approve the batch before it ships.

We inspect sampled spools against the agreed specification and share the results. Review the reports, give written approval, and pay for each shipment after inspection and before dispatch.

05Delivery

Receive your fiber.

We coordinate delivery to your agreed address or the bonded warehouse in Poland. Orders can be scheduled in batches of up to 50,000 km, roughly every 10 days, subject to the agreed allocation and shipment plan.

See what you’re sourcing.

Download full spec sheet ↓

Optical specifications

G.657.A2 optical specifications by manufacturer
ParameterFiberHomeHengtongZTT
Attenuation @ 1310 nm (dB/km)≤0.35≤0.35≤0.35
Attenuation @ 1383 nm (dB/km)≤0.35≤0.35≤0.35
Attenuation @ 1550 nm (dB/km)≤0.21≤0.21≤0.21
Attenuation @ 1625 nm (dB/km)≤0.24≤0.23≤0.23
Zero-dispersion wavelength (nm)1300–13241300–13241300–1324
Zero-dispersion slope (ps/nm²·km)≤0.092≤0.092≤0.092
Cable cutoff wavelength (nm)≤1260≤1260≤1260
Mode field diameter @ 1310 nm (µm)8.6 ± 0.48.6 ± 0.48.6 ± 0.4

Macrobending specifications

G.657.A2 macrobending specifications by manufacturer
ParameterFiberHomeHengtongZTT
Ø30 mm, 10 turns @ 1550 nm (dB)≤0.03≤0.03≤0.03
Ø30 mm, 10 turns @ 1625 nm (dB)≤0.10≤0.10≤0.10
Ø20 mm, 1 turn @ 1550 nm (dB)≤0.10≤0.10≤0.10
Ø20 mm, 1 turn @ 1625 nm (dB)≤0.20≤0.20≤0.20
Ø15 mm, 1 turn @ 1550 nm (dB)≤0.50≤0.40≤0.50
Ø15 mm, 1 turn @ 1625 nm (dB)≤1.00≤0.80≤1.00

Geometry specifications

G.657.A2 geometry specifications by manufacturer
ParameterFiberHomeHengtongZTT
Cladding diameter (µm)125 ± 0.7125 ± 0.7125 ± 0.7
Cladding non-circularity (%)≤0.7≤0.8≤1.0
Coating diameter (µm)245 ± 10245 ± 10245 ± 7
Core/cladding concentricity error (µm)≤0.50≤0.50≤0.54
Coating/cladding concentricity error (µm)≤12≤12.5≤12
Fiber curl radius (m)≥4≥4≥4

Mechanical specifications

G.657.A2 mechanical specifications by manufacturer
ParameterFiberHomeHengtongZTT
Proof test (as reported)*≥0.69 GPa0.69 GPa≥1.05%
Dynamic fatigue parameter (Nd)≥18≥20≥22
Peak coating strip force (N)1.0–8.91.3–8.91.3–8.9

Environmental specifications

G.657.A2 environmental specifications by manufacturer
ParameterFiberHomeHengtongZTT
Temperature cycling, −60°C to +85°C (dB/km)≤0.05≤0.05≤0.05
Water immersion, 23°C, 30 days (dB/km)≤0.05≤0.05≤0.05
Damp heat, 85°C / 85% RH, 30 days (dB/km)≤0.05≤0.05≤0.05
Dry heat aging, 85°C, 30 days (dB/km)≤0.05≤0.05≤0.05

Ø denotes mandrel diameter, not radius. Values are manufacturer specification limits, not measured results for your shipment. The selected source and agreed order specification govern acceptance. *Proof-test values retain the source’s reported units; strain (%) and stress (GPa) are shown as reported and have not been converted. For the fiber category, see ITU-T G.657 (opens in a new tab).

Complex requirements. Clear responsibility.

Testing beyond factory reports.

We check sampled spools against the agreed specification and compare performance using consistent test methods. You receive the results before approving shipment, with additional testing tailored to your application.

Request custom testing

At 1550 nm, the routine G.657.A2 check uses a Ø15 mm mandrel with one turn. The procedure rejects loss above 0.5 dB and targets 0.25–0.30 dB; the selected manufacturer’s tighter limits and any agreed criteria also apply. A Ø15 mm, 10-turn test compares loss per turn across sampled spools.

Before you order

A few useful answers.

Is this bare fiber or finished cable?

We supply coated bare optical fiber on factory spools. The standard coating is 245 µm. This offering is for buyers who process, cable, respool, or integrate fiber; it is not a finished cable or connectorized assembly.

What is the minimum trial order?

Stock trials start from 10 spools, subject to available lots and brands. Standard spool lengths are 50.4 or 60.4 km. Ask us to confirm the exact reel lengths and quantity available for your trial.

Can I compare manufacturers or test before committing?

Yes. You can request a stock trial, compare available brands using the same method, and arrange testing at the Poland warehouse with your specialist in person or by video. The spools can then be used for your own winding or application tests.

Can you supply 200 µm coating?

200 µm coating is available on request at a higher price. Confirm the manufacturer, coating tolerance, reel lengths, availability, and acceptance criteria with us before ordering.

What is included in the price and delivery?

We quote against your quantity, selected source, coating, delivery destination, and schedule. The quotation sets out the delivery terms, named destination, and included costs. Import duties, taxes, and clearance responsibilities must be agreed explicitly.

Can you carry out additional tests?

Yes. OTDR, 1625 nm measurements, or a method specific to your process can be agreed before the order. If additional equipment or training is needed, we confirm the method, timing, and acceptance criteria with you first.

What happens if a spool is defective?

Send the spool serial number and available evidence. For defects against the agreed properties or additional order requirements, Veyra replaces the defective spools without requiring a return. Veyra handles recovery with the factory.

Can supply be scheduled across several shipments?

For large orders, the procedure provides for a 30% advance to secure the price and production slot, followed by payments after inspection and before each shipment. Batches can be up to 50,000 km, roughly every 10 days. The actual schedule and payment allocation are confirmed in the order.

Fiber moves the world forward.

Tell us how much fiber you need and when you need it. Let’s build together.

Form preview. Online submissions are not available yet; please use a regional contact to inquire.